Can you change the feet on a clawfoot tub?

Can you change the feet on a clawfoot tub?

A clawfoot tub is a classic style usually made from cast iron. It requires help to move or to replace clawfoot tub feet. Clawfoot tub feet are separate from the rest of the tub, but that doesn’t make replacing them any easier.

How do you remove feet from a clawfoot tub?

Place some type of wood blocks or similar to hold the tub up securely. Take the foot that has fallen out and loosen the set screw so that it does not drag across the bottom of the tub as you slide the foot back into pace. You will need a good rubber mallet to do the next part. Slide the foot in place as far as you can.

Are clawfoot tub feet universal?

Here is a set of Clawfoot tub replacement feet that will work on most tubs manufactured within the last 100 years. These Lions paw styled, universal replacement clawfoot tub feet will be sure to add a stunning element of class to your bathroom.

How can you tell how old a clawfoot tub is?

Next to the manufacturer’s name or the “Made in U.S.A.” logo, you often find the date of manufacture in the month/year format. For example, the numbers 12 31 state the manufacture date as December 1931. You might also see another number, such as 5 1/2. This number states the length of the tub in feet.

How do you date a clawfoot tub?

Are old clawfoot tubs worth anything?

Since these tubs were originally designed to adorn the lavish bathrooms of the social elite, on average they’re worth a few thousand dollars (in good condition). Tubs that bear the manufacturers’ markings of historic companies like Crane, Mott, Kohler, Standard Sanitary Manufacturing, and L.

Can you have a shower in a clawfoot tub?

But, if you are adding a clawfoot tub or replacing the rod then be sure to do your research. Showering with the liner inside the tub should keep from getting excess water on the floor surrounding it. Another thing that will help is getting one large liner and curtain instead of multiples put together.

How do you remove clawfoot tub feet?

Now that the tub is off the ground and properly supported, you can remove the clawfoot tub feet. Loosen the bolt where the feet connect to the tub. A wrench or screwdriver will do the trick nicely. Older models will have clawfoot tub feet that screw directly into the tub.

What do you call a claw foot bathtub?

First, take note of terminology: “Traditionally, claw-foot baths had a Victorian-style ball-and-claw design, but today any tub on feet is often called a claw-foot,” writes our correspondent Barbara Peck in Remodeling 101: Romance in the Bath: Built-In vs. Freestanding Bathtubs.

What should I do if my Tub feet are not flush on the floor?

If the tub feet do not sit flush on the floor, flip the tub back over and shim the foot that is causing the unevenness. After all adjustments have been made, trim away any excess shim.

Can a cast iron tub be lifted by the feet?

Lift the tub by the rim only, never by the feet. If the tub feet do not sit flush on the floor, flip the tub back over and shim the foot that is causing the unevenness. After all adjustments have been made, trim away any excess shim. Additional adjustments can be made by tightening the levelers on the bottom of the feet.