Menu Close

How do you reset the combination on a Brinks safe?

Admin

How do you reset the combination on a Brinks safe?

How to Change the Combination on a Brinks Safe

  1. Open the safe using the current combination.
  2. Press the memory button.
  3. Enter the new preferred combination in numbers between 3 and 8 only, then press “B.” Listen for two beeps and watch for the LED light to illuminate.
  4. Keep the door open and press down the lock handle.

How do you change the code on a Brinks lock box?

Answer: When you first take the lock out of the package, the combination is, “0000.” Enter this combination and then slide the notch in the back of the lock up and to the left. Once you do that, set your new combination, then slide the notch to the right and down. Now your Brinks Lock is reset.

How do you use Brinks safe?

Turning Sequence instructions for Brinks safes….Brinks Turning Sequence

  1. Turn the dial to the RIGHT (CLOCKWISE) three times to clear prior settings.
  2. Start the dial on 0 (ZERO).
  3. Turn the dial to the RIGHT, passing your first combination number FOUR (4) times and stopping at that number on the FIFTH time around.

How do I change the combination on my electronic safe?

Changing the Combination on an Electronic Safe Lock

  1. Press the “0” key six times (you will then hear two beeps)
  2. Enter your existing six-digit code (you should then hear two beeps)
  3. Enter your new six-digit code (you will hear one beep)
  4. Re-enter your new six-digit code (you will hear one more beep)

How do you reset the combination on a First Alert Safe?

With the safe in the open position, press the small reset button located on the inside top edge of the door. Enter your new three to eight digit (3-8) passcode followed by the # key. Immediately repeat the sequence, beginning with the new passcode followed by the # key.

How do you change the combination on a key lock box?

To do this, you simply use the reset lever and enter a new combination.

  1. Open shutter door to access the combination dials and the release button.
  2. Push the reset lever to the left and into the downward position.
  3. Rotate the combination dials to the combination you want to use.