Menu Close

What is a Umatic tape?

What is a Umatic tape?

U-matic was an analogue video cassette format introduced by Sony in 1971 (it reached the UK in 1973), using ¾-inch tape and a helical video head drum. It was the very first video cassette format, and all video tape formats prior to this had been open reel.

Are DAT tapes still used?

DAT, or Digital Audio Tape, was once considered the best medium for both live taping and studio backup. In recent years, however, the low cost and high quality of hard disk recording have made the DAT nearly obsolete. Still, many tapers and studios still use the DAT format.

What is the most common digital reel-to-reel format?

The tape is composed of magnetic particles, binder, and a base of either acetate, paper, polyester, or PVC. The quarter-inch size, which was the standard width of open reel tape until the 1950s, is the most common open reel tape width, particularly among amateur recordings….¼” Open Reel.

RH 30–50% RH

What does DAT tape stand for?

Digital Audio Tape
Abbreviation for Digital Audio Tape. DAT is a signal recording and playback medium introduced by Sony in 1987. As the name suggests, the recording is digital rather than analog, DAT converting and recording is done without data compression, which means that the entire input signal is retained.

What does Betamax mean?

video cassette recorder
Betamax (or simply “Beta”) is a consumer-level video cassette recorder (VCR) developed by Sony in Japan and released in 1975. It is an analog recording technology that makes use of magnetic tapes in a cassette format.

Is DAT better than CD?

DAT can record at sampling rates equal to, as well as higher and lower than a CD (44.1, 48, or 32 kHz sampling rate respectively) at 16 bits quantization.

Are DAT tapes fast?

Tape speed in DAT machines is 8.15 mm/sec for recordable tapes, but is 12.225 mm/sec for pre-recorded DAT tapes. There are several electronic switches in DAT machines (both audio recorders and computer DAT drives) that allow them to interface with various kinds of DAT tape.

What is half inch tape reel?

From Wikipedia, the free encyclopedia. Half-inch tape refers to magnetic tape with a width of 1⁄2 in (12.7 mm) in a format such as: Computer magnetic tape data storage.

What is NAB reel?

The tape decks of the 1950s were mainly designed to use tape ¼” wide and to accept one of two reel formats: Ten-and-a-half-inch reels, almost always with metal flanges, which fit over a hub three inches in diameter. The reels were known as NAB reels and the hubs on which they were mounted as NAB hubs.

Are DAT tapes expensive?

DAT being digital is still less expensive than a premium metal bias tape. DAT was a whole lot more finicky than analog. And a lot more unforgiving, and a lot more expensive.

Is there a Sony reel to reel tape recorder?

SONY TC-366 REEL TO REEL TAPE DECK W NOISE REDUCTION SERVICED * NICE! Sony TC-9000F-2 Reel to Reel Tape Recorder good condition! Rare Sony Model 300 Tube Reel To Reel WORKS ! Unmolested Original Pick Up Ony! SONY TC 580 Reel To Reel Player w/Dustcover In Original Box EX!!

How big is a professional reel to reel tape?

The “thick” Professional tapes SM468, SM900, SM911 are roughly 1.5 times thicker and shorter. 10.5″ (26.5cm) reel holds 2500ft (762m) of tape; 7″ (18cm) reel holds 1200ft (366m) of tape. Recording times: Normally these are used on professional 2 track machines and speed not less than 7.5ips (19cm/s), which is the lowest speed used by professionals.

What kind of tape do you need for a vintage tape deck?

If buying a vintage tape deck, make sure it takes ¼-inch tape. Tape reels come in two main types, NAB reels and CINE reels. NAB reels were typically used in studio and professional settings while CINE reels (also known as Trident) were the norm in domestic applications.

What kind of tape does a stereo tape recorder use?

Broadly speaking, ¼-inch tape was the norm for domestic mono or stereo tape machines, while professional mono, stereo and multi-track tape recorders used any of ¼-inch, ½-inch, 1-inch or 2-inch tape. More tape width means more information storage capacity so the wider the tape, the better the potential fidelity.