# What is the number of suspension insulators required for 132 kV transmission?

## What is the number of suspension insulators required for 132 kV transmission?

Hence, the number of suspension insulators required is 8.

## How many insulators are there?

The five types of insulators are: Suspension insulators. Pin insulators. Strain Insulators.

Which insulator is used in transmission line?

Insulators used for high-voltage power transmission are made from glass, porcelain or composite polymer materials. Porcelain insulators are made from clay, quartz or alumina and feldspar, and are covered with a smooth glaze to shed water.

### How do I know what kV my transmission line is?

One kilovolt is 1,000 volts (V). The voltage level can be recognised by the length of the insulator string and the number of insulator elements….Identifying the voltage level.

Voltage level of a transmission line Length of insulator string ​Number of insulator discs
110 kV approx. 1 metre​ 6–8
220 kV​ ​approx. 2 metres 10–12

### Which type of insulators is used on 132 kV transmission line?

Disc type insulators: The pin insulator is used in power distribution for the voltage up to 33kV. It is placed on the cross arm of the supporting tower. The pin insulator has grooves on the upper end for keeping the conductor.

How can you tell if a transmission line is 11 kV?

11 KV Transmission line has double pole (See Pic) DP stands for double Pole or Duro Pole. They have one each disc insulator with each phase (In pic with red arrow, Red Yellow Blue RYB). These disc insulators can be found at DP or Tapping Channel.

#### How do I know my 33KV line?

In a transmission line, if three pieces of disc insulators per phase are connected, then the KV of the transmission line is 33KV. For the 33KV transmission line, generally, Four Pole structure is used.

#### Which type of insulator is used in 132 kV transmission line?

Solution(By Morningexam Team) The insulators are used on 132 kV transmission lines is Disc type.

What are the different types of insulators used in transmission lines?

Pin, Suspension, and Strain insulators are used in medium to high voltage﻿ systems. While Stay and Shackle Insulators are mainly used in low voltage applications. Pin insulators are the earliest developed overhead insulator, but are still commonly used in power networks up to 33 kV system.

## What kind of voltage does a suspension insulator need?

Each disc in a suspension insulator string is designed for a low voltage, say 11 kV. The number of discs in a string depends on the working voltage. Suspension insulators are preferred for transmission lines. Each unit of disc is designed for a low voltage, say 11 kV.

## How to determine the number of disc insulators?

We usually use as a rule of thumb for determining the number of porcelain/glass suspension disc insulators: 10kV for each disc (standard 5-1/4′ x 10″). For typical system voltages in North America, this would be: 69kV: 4-6 discs; 115kV: 7-9 discs; 138kV: 8-10 discs; 230kV: 12 discs; 345kV: 18 discs; 500kV: 24 discs.

How many conductors are in a transmission line?

Transmission lines are always built with sets of three conductors with an optional small wire or two at the top of the structure to serve as lightning protection.