Menu Close

How do I configure a Cisco router?

How do I configure a Cisco router?

9 Steps to Setting Up a Cisco Router

  1. What You’ll Need.
  2. Connect the router to the PC, and start a terminal emulation program.
  3. Identify the router’s interfaces.
  4. Configure IP addresses.
  5. Set up access lists.
  6. Configure basic TCP/UDP/ ICMP inspection.
  7. Apply the access lists and inspection rules.
  8. Set up NAT.

What type of cable should you use to connect to the console port of a Cisco router?

The console port is an asynchronous RS-232 serial port with an RJ-45 connector. You can use the RJ-45 rollover cable and the RJ-45/DSUB F/F adapter or the DB-9F/RJ-45F PC terminal adapter to connect the console port to a computer running terminal emulation software.

What type of cable is required to connect the routers in Packet Tracer?

Ethernet cable
Copper straight-through: This is a standard Ethernet cable that is used to connect two devices that operate in different layers of the OSI model (such as hub to router and switch to PC).

How do I connect my Cisco router to my computer?

Connect a PC to a Cisco Router or Switch

  1. Connect the 9 pin to RJ-45 adapter to the console cable.
  2. Connect the 9 pin adapter to COM1 on your PC(If your PC only has USB ports and does not have a 9 pin serial port, you will need to purchase a USB to 9 pin serial converter).

How do I access my Cisco router?

How to log-in to Cisco router?

  1. Connect your device, either computer or mobile, to your internet.
  2. Open a web browser and enter the IP address of your router. The IP address used for most CISCO routers is 192.168.
  3. From the log-in page, enter your username and password.
  4. Hit the Ok button to access your web interface!

How do I connect to Cisco?

Connect

  1. Open the Cisco AnyConnect app.
  2. Select the connection you added, then turn on or enable the VPN.
  3. Select a Group drop-down and choose the VPN option that best suits your needs.
  4. Enter your Andrew userID and password.
  5. Tap Connect.

What is a Cisco router?

A Cisco router connects different networks together whereas, a switch connects multiple devices together to create a network. Routers work on the Physical layer; Data link layer and the Network layer whereas Switches, as well as advanced switches, work on the Data link layer and the Network layer too.

What is Cisco cable?

Console cables — also known as Cisco cables, rollover cables and management cables — are designed for a specific purpose. They connect Cisco networking devices to terminals or PCs for configuration. It is a terminal connection, and its purpose is to enable the connected computer to configure the networking device.

How do I connect to a Cisco router on Windows 10?

Access router command line interface using Windows laptop

  1. Under Category, choose Session.
  2. Under Connection type, choose Serial.
  3. In the Serial line, enter the COM port on your laptop that is connected to the console port on your router, using the console cable.
  4. Click Open.

What is the default login for Cisco router?

When you access the device, you should be asked to enter a username and password. The default user name of your Cisco router is either “admin” or “cisco”. The default password of all Cisco routers is either “admin”, “cisco” or is a blank field.

Where does a Cisco router need to be located?

You’ve just deployed a new Cisco router that connects several network segments in your organization. The router is physically located in a server room that requires an ID for access.

Where is the Cisco router in Learn Mode?

Now up your study game with Learn mode. You just deployed a new Cisco router that connects several network segments in your organization. The router is physically located in a server room that requires and ID card to gain access. You backed up the router configuration to a remote location in an encrypted file.

Where is the router located in a server room?

The router is physically located in a server room that requires an ID card to gain access. You’ve backed up to the router configuration to a remote location in an encrypted fil. You access the router configuration interface from your notebook coputer by connecting it to the conosole port on the router.

How to back up a router to a remote server?

You use an FTP client to regularly back up the router configuration to a remote server in an encrypted file. You access the router configuration interface from a notebook computer that is connected to the router’s console port. You’ve configured the device with a user name of admin01 and a password of P@ssW0rd.