Table of Contents
What car has the 6G74 engine?
2004 Mitsubishi Montero Sport Technical highlights 3.5-Liter V6 engine (6G74) October 01, 2003 — Cypress, Calif. Both the Montero Sport LS and XLS are powered by a 3.5-liter, SOHC, 24-valve, V6 engine that produces 197 horsepower at 5000 rpm and 223 pound-feet of torque at 3500 rpm.
What cars have a 6G72 engine?
The 6G72 engine was installed on:
- Mitsubishi Galant.
- Eclipse III.
- Pajero / Montero.
- Dodge Daytona.
- Ram 50.
- Chrysler LeBaron.
- Sebring Coupe.
- And a number of other cars popular at the end of the last century.
What is the difference between 6G72 and 6G74?
The only real visible difference between a 74 and a 4 bolt 72 is the deck height. The heads sit up 18mm higher on a 74. You could tell if a 74 had had the block girdle clearance ground to fit a 3S oil pan.
What Mitsubishi has a V6?
The Mitsubishi 6B3 engine is a range of all-alloy piston V6 engines developed by Mitsubishi Motors. Currently, only one engine has been developed, a 3.0 L (2,998 cc) V6 first introduced in the North American version of the second generation Mitsubishi Outlander which debuted in October 2006.
What cars have a 6G75 engine?
The 6G75 is a 3.8 L (3828 cc) version with 95 mm bore and 90 mm stroke….6G75
- 2006–present Mitsubishi Eclipse.
- 2004–present Mitsubishi Galant.
- 2003–present Mitsubishi Pajero (aka Montero/Shogun)
- 2003–present Mitsubishi Endeavor.
- 2005–2008 Mitsubishi 380.
Is the Mitsubishi 3.0 V6 a good engine?
The most often-heard complaint about this engine is not that it seems to fail, but that it leaks and/or consumes oil. Engine life seems to be good, with many of these motors reaching 200,000 to 300,000 miles. The oil leaks and consumption problems can be traced to several causes.
What engine does the 2006 Mitsubishi Eclipse GT have?
3.8 L V6
2006 Mitsubishi Eclipse GT/Engine
What is the difference between interference and non-interference engines?
An interference engine is a type of 4-stroke internal combustion piston engine in which one or more valves in the fully open position extends into any area through which the piston may travel. By contrast, in a non-interference engine, the piston does not travel into any area into which the valves open.
Did Mitsubishi make a V8?
The Mitsubishi 8A8 engine is a range of V8 powerplants produced by Mitsubishi Motors since 1999.
What kind of engine does a Mitsubishi 6G72 have?
6G72 – 3.0L, 2972cc. This motor came in various forms, SOHC and DOHC naturally aspirated versions. DOHC twin-turbo version also available in 3000GT/GTO VR-4.
Which is better a 6G75 or a 3g72?
The 6G75 engine has an improved camshaft profile over the 3.0 / 3.5 engines for better breathing and retaining smooth idle The 6G75 cylinder head in stock form outflows and outperforms a 6G72/74 cylinder head even after being ported. It also has larger valves and much better designed ports.
Is the Chevy 3.8L V6 the same as the V-8?
The V-6 was almost identical to the V-8 except it had two fewer cylinders. The engine featured an odd-fire design in which the firing impulses of the powerplant were unevenly spaced. This gave the engine its trademark low-rumble, or as its detractors complained, a rough idle.
Is it worth it to convert a 6G75 engine?
It is our recommendation that it is more cost effective to fit a 6G75 engine into these vehicles rather than going to the expense of performing any cylinder head / camshaft work on the 6G72/74 engines. You would get better gains, more torque and a stronger base platform for future modifications at a cheaper price by performing this conversion.