Menu Close

What is hay cut with?

What is hay cut with?

Machines that can cut hay are called mowers. Today there are two types of mowers used to cut hay that can be pulled by machines. Rotary disk mowers have several round discs that cut the hay. Sickle bar mowers have a bar with teeth that cut down the hay.

What is the machine that cuts hay called?

A tedder (also called hay tedder) is a machine used in haymaking. It is used after cutting and before windrowing, and uses moving forks to aerate or “wuffle” the hay and thus speed up the process of hay-making. The use of a tedder allows the hay to dry (“cure”) better, which results in improved aroma and color.

What is hay put in?

Next, the cured hay is gathered up in some form (usually by some type of baling process) and placed for storage into a haystack or into a barn or shed to protect it from moisture and rot. During the growing season, which is spring and early summer in temperate climates, grass grows at a fast pace.

How is hay cut and baled?

Unlike an ordinary lawn mower or bush hog, it cuts the grass at the stalk and lays it down rather than mulching it into hundred of pieces. You’ll always cut a hay field clockwise so the tractor tires are not running down the uncut grass whereas the blades may not be able to get underneath.

What is Ted hay?

A traditional European technique, tedding is the process used by growers to cure mown hay, particularly in cooler climates where drying hay thoroughly can be a challenge. Tedding speeds up drying of hay and other forage through physical manipulation: Mixing helps rotate dry grass with green.

Why is it called a Tedder?

A horse-drawn implement for fluffing hay after it was cut, and primarily after windrowing. It was intended to stir up and turn over extra heavy hay to help the part near the ground to dry, or to help the drying of cut grass that had been dampened by an unexpected rain.

Is hay a straw?

Straw is a stalk, usually a waste product of wheat, that’s used as bedding for barnyard animals. Hay—typically alfalfa or a grass—is used as animal feed. A. Straw and hay both begin life the same way—as a field crop.

How long can hay lay before baling?

As a rule of thumb, wait to rake hay until after the dew has dried and the sun nears its peak, around 11 a.m. If possible, let the raked hay sit for an hour or two before baling to allow more drying time.

What is the right time of day to cut hay?

In many environments, in fact, morning cutting can ensure that hay has more hours of sunlight, and therefore dries more quickly-making it the preferred time of day. Occasionally, afternoon cutting may pay off for Eastern farmers, Rankin notes. In late summer weather, it may be possible for the grass to dry quickly.

Which cut of hay is best?

There are a lot of factors that decide which hay is best. Generally speaking, the second and third cuttings are “best” because first cutting tends to get a bit mature before it gets cut. This doesn’t mean all second or third cutting is better than first though.

Is first cut hay better than second cut for horse?

Good first cut hay should be absolutely fine for most horses doing moderate amounts of work, with good teeth and in good health. Second cut usually goes for a higher price, too. Oh, also some horses don’t even care for second cut, and some think it’s a grand treat.

What is this about different “cuts” of hay?

Types of hay First cut is the roughest and highest in fibre, and slightly lower in nutritional value. Second cut is a balanced amount of fibre and protein. Third cut is softer and greener, with relatively less fibre and more protein.